139. Chapter 138 Interactive Holographic Projection
Chapter 138 Interactive Holographic Projection
The manufacturing technology of touch screen display is completely different from that of chip. Kang Chi mastered the technology in just over a day.
Then, just like when he made 2D graphics cards, he used his money power to a screen manufacturer in Lin’an, and then he operated the machine to successfully rub out a touch screen.
The system programming is also very simple, as long as the random graffiti data can be saved, Kang Chi directly handed this task to the company’s programmers.
On the night he returned from Lin’an, Kang Chi completed the assembly of the plotter.
[Item: Electronic Plotter]
[Manufacturer: Kang Chi]
[Item Level: 1]
[Experience: 0/100]
[Item Status: Intact]
[Analysis Item: No Analysis Item]
[General Experience: 42814]
[Mastery Points: 3.2 (+0.5)]
Only 0.5 mastery points added?
It can be seen how much the system dislikes this item…
However, like the point reading machine, this is a product of simplicity.
Kang Chi can make it more advanced and write a drawing system similar to CAD, but there is no need to waste so much time and energy on problems that can be solved with experience.
General Experience -100, - 300, - 600, - 1800!
After upgrading four times in a row, Kang Chi paused for a while.
At this time, the appearance of the plotter was almost the same as that of an ordinary tablet. He picked it up and studied it briefly, and found that it had a lot of functions. What kind of creative painting program, 2D animation drawing program, 3D animation production, industrial design program…
The main focus is on the comprehensive development of morality, intelligence, physical fitness, aesthetics and labor.
This was obviously not what Kang Chi wanted, so he connected the data cable and deleted all the redundant programs inside, leaving only one industrial design software.
Then continue to upgrade.
General experience -5400!
Since Kang Chi deleted the redundant programs, the system corrected the upgrade direction in time and added all attribute points to industrial design capabilities. Therefore, after this upgrade, the appearance of the plotter has changed dramatically.
First of all, the size is much larger, almost half the size of an office desk, with two more ball operators and auxiliary control buttons.
Kang Chi feels a bit like the workbench of DaVinci color grading software.
Fortunately, the screen is still touch-sensitive. After calling the system manual on the screen, Kang Chi simply operated it according to the instructions and found that the efficiency of this thing is indeed quite high.
By calling the basic model and changing it, a complex three-dimensional model can be easily drawn, and the efficiency should be three to five times faster than the computer.
However, the premise of five times efficiency is to be familiar with the operation of this workbench.
So its fundamental interaction principle is actually no different from the mouse and keyboard…
Kang Chi obviously has no interest and time to play with this thing, so he gritted his teeth and chose to continue upgrading.
General experience -16200!
After spending 16,000 experience points, the appearance of this plotter has changed dramatically again, turning into a small white disc that can be held in one hand, which looks a bit sci-fi.
[Item: Electronic Plotter]
[Manufacturer: Kang Chi]
[Item Level: 7]
[Experience: 0/48600]
[Item Status: Intact]
[Analysis Item: Analyzable]
[General Experience: 18414]
[Mastery Points: 3.2 (+0.5)]
Kang Chi picked it up and observed it carefully. He found that it had a data interface and a switch button. At the same time, the cover at the bottom could be opened, and there were ten round metal pieces inside. ”Turn on the machine.”
As Kang Chi pressed the button, a beam of light was projected from the center of the machine.
Then Kang Chi was surprised to find that this thing was actually a 3D holographic projection device!
And the clarity and resolution were so high that Kang Chi felt that the 3D buttons on it were real.
He reached out and touched the “Help” button, and the projection immediately switched to a video of operation demonstration.
It can actually interact!
After watching the video patiently, Kang Chi was shocked and exclaimed that this experience of more than 10,000It’s worth the flower inspection.
Three-dimensional holographic projection technology is actually not a new thing. It has long gone from science fiction to reality.
Many ordinary people with good hands-on ability can rub an inverted transparent pyramid with their hands to project the image on the screen to achieve the effect of holographic projection.
Other holographic technology routes include those similar to a fan,
changing the air composition and forming an image through the intersection of light…
There is also a pseudo-hologram, which directly changes the normal projection screen into a translucent gauze, which can achieve a realistic visual effect at a fixed angle and is mostly used for stage special effects.
But the technology used in this drawing board is obviously not this low-level technology.
Not only does it not require a reflective mirror, but it also does not have a large fan whirring, and it does not spray water vapor to change the air humidity.
Through its interactivity, Kang Chi estimates that it is likely to be a super upgraded version of the Fairy Light technology route.
Fairy Light is also the holographic technology route developed by the little notebooks. It uses the technology of femtosecond lasers to ionize air molecules and produce luminous plasma with small explosions, thus achieving the effect of holographic projection.
However, the little notebook has only preliminarily verified the feasibility of this technology. What is projected is just a series of fuzzy small light spots, which is obviously not at the same level as Kang Chi’s plotter.
Kang Chi opened the analysis item with some curiosity and found that it took a full 40 mastery points to analyze all the technologies of this plotter.
And his current mastery points are only a pitiful 3.2, so he can only analyze it again in the future…
Silently closing the panel, Kang Chi attached the ten small metal pieces under the box to his ten fingers in order according to the demonstration video.
The purpose of doing this is to facilitate gesture control even when the fingers are not in contact with the holographic projection.
Next, it is time to witness the miracle.
Kang Chi said, “Open the basic model library.”
The projection immediately turned into dozens of options, all of which were relatively basic geometric models.
Kang Chi chose a cube, and then the cube floated in the air like a real object.
Kang Chi touched one of its edges: “Chamfer.”
This edge immediately changed from a right angle of 90 degrees to a rounded arc structure. After Kang Chi gently moved his fingers, the arc of the chamfer also changed.
There was also a number on the edge, showing the strength and number of lines of the chamfer.
“0.45.”
As soon as Kang Chi finished speaking, the chamfer strength directly became 0.45.
Not bad!
It was just like pinching real parts with your hands.
At the same time, voice command assistance can greatly improve efficiency.
It took only three minutes for Kang Chi to easily complete the design of the camera shutter baffle.
And it was Kang Chi’s first time to use it for design.
Once you get used to this design method and are familiar with the basic model library, and can flexibly call more complex basic models that are closer to the part structure, the speed will definitely be so fast!
Although it is a bit regrettable that I didn’t get the black technology that can directly read brain information, but people can’t be too greedy. This new design method is much more efficient than using design software on the computer, and it also makes the design interesting and not tiring. Kang Chi is already very satisfied with this.
For the next whole day, Kang Chi locked himself in the office, designing and familiarizing himself, and completed the design of the entire camera shutter system and the overall shell on the same day.
And when Kang Chi tried to use this plotter to design the CMOS chip the next day, he felt its power again.
(End of this chapter)