100. Chapter 99 Analysis of Oil Extractors
Chapter 99 Analysis of Oil Extractors
Looking at the oil extractors in front of him, Kang Chi couldn’t help but fall into deep thought.
Although he didn’t know its specific performance, he could tell from the upgrade experience that the technological content of this thing should have reached its current peak. If it continues to upgrade, it would probably be a super black technology far beyond the earth’s civilization.
Before knowing the technological content inside, Kang Chi didn’t dare to pull it out for testing rashly. Considering that he didn’t have so much experience to upgrade it for the time being, he thought about whether to take a gamble and analyze it directly.
[Analysis project: Analysis of extraction principle, 3 mastery points are required,
System analysis: 3 mastery points are required,
Structure analysis, 3 mastery points are required,
Material analysis, 5 mastery points are required,
Battery analysis, 5 mastery points are required. 】
The oil extractor has only five analysis projects in total, which is completely incomparable to the nearly 100 analysis projects of the graphics card.
But the mastery points required add up to 19 points. This shows that although there are not many core technologies in this machine, each one is not simple.
Just highlight that the worm is fierce and doesn’t talk much!
Kang Chi couldn’t help but feel a little timid, worried that it would be too abrupt to bring out so many awesome technologies at once? But on second thought, technology is actually not afraid of high,
He can completely castrate some performance appropriately according to the situation, and then slowly improve and upgrade it later.
Thinking of this, Kang Chi no longer hesitated, and started directly from the top, choosing to refine the principle analysis.
”Hiss——”
As a large amount of knowledge rushed into his brain, Kang Chi couldn’t help but take a breath.
I don’t know if I didn’t do the right homework in advance, or the technical content is relatively high, this analysis process is a little more painful than the last time I analyzed the silicon wafer process.
However, the result made him quite satisfied!
It is the electrothermal degreasing method.
This guy’s technology tree is not crooked! In order to make the system recognize his ideas more accurately, Kang Chi also specially improved the Fushun retort and forcibly installed an electrothermal auxiliary module in the heating area…
Now it seems that this forced correction method has also provided some upgrade and optimization ideas for the system.
After digesting the relevant knowledge of the electrothermal degreasing method, Kang Chi continued with the next project.
System analysis, mastery point -3,
Structural analysis, mastery point -3,
Material analysis, mastery point -5,
The previous two analyses are still normal, just a problem of knowledge accumulation and application, But when it comes to material analysis, Kang Chi suddenly has an unexpected surprise.
It turns out that the shell of this thing is just relatively cheap stainless steel! It is different from ordinary stainless steel. It is an improved version of 309S. On the basis of 309S’s heat resistance and oxidation resistance, a small amount of nitrogen and titanium elements are added to improve its strength and corrosion resistance, which is very suitable for dealing with the complex environment of shale layers.
At the same time, using this alloy material, whether in terms of manufacturing cost or later maintenance, it is definitely much cheaper than titanium alloys.
In addition to being suitable for shale layers, this material must also have a good space for use in the sea, which is considered the most valuable technology in this analysis.
Continue,
Battery analysis, mastery point -5.
300Wh/kg!
When Kang Chi had this information in his mind, he was stunned.
First of all, the energy density of 300Wh/kg can only be barely achieved by the awesome ternary lithium battery.
But this is not a ternary lithium battery, but a sodium ion battery! As a type that once stood at the same starting line as lithium batteries, sodium-ion batteries were later treated with cold eyes and ridicule.
Although the working principle and structure of sodium-ion batteries are similar to those of lithium-ion batteries, the energy density can only reach 90-120Wh/kg, which is less than half of that of ternary lithium batteries.
In addition, its main materials are relatively cheap and common sodium, iron, manganese, aluminum, etc., so it has always been regarded as the successor of lead-acid batteries, the new favorite of two-wheeled electric vehicles and old man’s music. Anyway, those who engage in new energy vehicles don’t look down on it at all.
However, as the cost of lithium batteries rose, the technology fell into a bottleneck, and the technology of sodium-ion batteries gradually caught up, sodium-ion batteries seem to have become popular again in recent years.
ManyNew energy vehicle manufacturers have begun to make efforts in this area, trying to use sodium batteries as a backup for lithium batteries in low-end and mid-range products. If they knew that Kangchi had a sodium ion battery with an energy density of 300Wh/kg,
It is unknown how big an earthquake will happen in the new energy market…
It is estimated that the battery capacity of the prototype built by Kangchi was too perfunctory, which led the system to think that he was too poor, so both the structural materials and the battery direction seemed to be upgraded in the direction of cheapness and durability…
After sorting out the knowledge, Kangchi dismantled the outer shell of the oil drill as the first step, and then removed the sodium ion battery packs inside one by one, and finally purchased a batch of ternary lithium battery packs online…
Yes, he was going to replace the prince with a cat and castrate this oil drill.
The 300Wh/kg sodium battery is a big treasure, and Kangchi is reluctant to give it up, and dare not take it out now.
If this thing is not done well, it will shake the foundation of the lithium battery industry! It was a bit exaggerated to make an oil extractor. For special stainless steel materials, he could also set up a project in Dahan Silicon Industry and let Dahan Silicon Industry help him make it, but this sodium battery is really hard to explain.
Before making full preparations, Kang Chi could only choose to refrigerate it…
In the next few days, Kang Chi basically drew various drawings. First, the reinforced stainless steel smelting furnace named 309S+ by him was sent directly to Fang Qiang who was still in Steel City after drawing, requiring him to complete the manufacturing and parts production within half a month.
Secondly, it was the design drawing of the oil extractor itself.
The current size of the oil extractor is obviously too small, and it can only be used as a technical verification machine. If you want to mine shale oil on a large scale, you must use a big guy…
Time unknowingly came to the end of August, and the temperature almost rose to the highest point of the year.
While most people were feeling the heat, Li Chen was wrapped in a thick down jacket, shivering with cold…
Because he was at the Geladandong Snow Mountain at 33°N and 91°E! Of course,
It was just at the foot of the mountain…
Although Li Chen was brave, he was still quite nervous about climbing a snowy mountain over 6,600 meters high.
Since the summer vacation, Li Chen has taken two classmates to start a pleasant highland self-driving tour.
On the one hand, it is to travel to escape the heat, and on the other hand, he wants to take some materials and complete a few equipment limit evaluations.
For example, on the snowy mountains with a temperature of more than ten degrees below zero, shooting starry sky time-lapse, testing the stability and endurance of the equipment, etc.
As for why he took two strong classmates…
Of course, it is for safety considerations. Taking turns driving, they can also take care of each other. As for asking them to help him carry the dozens or hundreds of kilograms of equipment, it is just by the way, really.
A lot of people are scrambling to travel with him for free!
“Brother Chen, I can’t do it anymore… Rest, rest!”
”I can’t do it anymore…”
”…”
”Didn’t I just rest…”
”Brother, this is a plateau, and there are dozens of kilograms of equipment. Can you try to carry it? I’m lucky I’m not short of oxygen…”
Knowing that he was in the wrong, Li Chen smiled and said, “Brother Feng and Brother Yong, thank you for your hard work… How about I carry it?”
Xiong Feng glanced at Li Chen’s thin body and said, “Come on, I don’t want to spend the night in the snow. It will kill people.”
”Really?”
”Go away, don’t give me that.”
”Then I’ll treat you to mutton hotpot tonight to replenish your bodies?”
When he heard about mutton hotpot, Xiong Feng’s eyes lit up immediately: “That’s possible!”
As he said that, he took out his mobile phone, connected it to the satellite signal amplifier, and prepared to check the map, but suddenly saw a new notification from Taobao.
“Fuck! Brother Chen! Daqin Optics has released new products!”
”Huh?”
”The third generation lens! It’s not a new product, their lenses have all been upgraded!”
(End of this chapter)